About the Receiver:
Model Number: 1K40A
Operating Voltage: DC 12-30V
Quiet Current: Less than 6mA
Operating Temperature: -40°C to +80°C
Receiver Sensitivity: Greater than -105dBm
Operating Frequency: 315MHz
Output Voltage: DC and AC are optional
Maximum Load Current: 10A
Size: 9.6*6.2*2.9cm
Operation Method: Changed by DIP switch.
Momentary: Default 1 or 2 position relay: Long press -> On; Release -> Off.
Toggle: ON direction 1, default 2 relay: Press -> On; Press the same button again -> Off.
Latching: ON direction 2, default 1 relay: Press -> On; Press another button -> Off.
2CH Momentary + 2CH Toggle: Both 1 and 2 are turned ON.
Learning and Clearing Instructions:
Learning: Press and release the learning button. The learning indicator will light up once, then press the remote control transmitter. The learning indicator will flash three times and then go out, indicating successful pairing.
Clearing: Press and hold the learning button for about 5 seconds, turning the indicator from on to off, then press the remote. If the relay does not respond, this means the code has been successfully cleared.
Transmitter Information:
Model Number: AK-GK06TX
Buttons: 4
Operating Frequency: 315MHz
Remote Distance: 100-500M
Operating Current: 13 mAh
Encoding: EV1527 Code
Size: 150 x 49 x 31mm
1. Easy Programming: Press the learning key, then press the remote control to complete pairing. Four operating modes are available: momentary, toggle, latched, 2CH momentary + 2CH toggle. Users can change the operating mode according to their needs.
2. Large Load Power: Uses a large 10A relay output.
3. Wide Range of Applications: Lighting control, garage door control, electric door control, remote control curtains, lifting equipment, anti-theft alarms, industrial remote control, home appliances, smart toy remote control, various low-speed digital signal transmission, wireless control, widely used in motor control, water pump control, projection screen lifter control, and the security industry.
4. Stable operation, ultra-differential differential receiving module with strong interference resistance. Wiring is convenient. Users do not need to open the housing to complete the wiring.
5. Reception Distance: This RF remote control uses RF technology with a stable signal. The wireless RF switch signal can pass through walls, floors, and doors, allowing reliable control of the receiver from anywhere within a reliable distance. Approximate reception distance: 100-500m.