Hamanaka Iron-On Patch, Inflatable Applique, Sanrio Pochacco, H458-419-008, Made in Japan

Easy to apply with an iron! When you apply heat with an iron, the patch pops out! Use a dry iron on medium heat and apply your entire body weight to it, and it will plump up in 15 seconds. [Quality (main materials)] ・Illustration: Urethane resin ・Resin sheet: PET film [How to use] (1) Prepare a firm ironing board. (2) Set the iron temperature to medium dry temperature (approximately 150 degrees) *1 (3) Place the fabric you want to print on the ironing board. (4) Place the adhesive side (white side) face down where you want to print. (Do not peel the illustration off the sheet.) (5) Without using a pressing cloth, place the part of the iron without steam holes directly on the sheet, and with both hands pointing straight down, apply your entire weight and press for about 15 seconds to heat and press the sheet together. (6) Release the iron and quickly peel off the sheet. (7) Finished. *1 Press the sheet at a temperature of around 150°C without steaming or spraying it with water. (If the temperature is too low, it may not adhere well or expand properly.) *2 Not suitable for materials with uneven surfaces such as knitted wool, shrinkable materials, smooth vinyl materials, acrylic materials, and other heat-sensitive fibers. [Note] - Please separate the sheets into individual designs. Please note that once used, items cannot be reused or redone. -Please wash by hand with water. - Avoid using a dryer, chlorine bleaching, or dry cleaning. - Please be especially careful with ironing temperatures for heat-sensitive items such as acrylic resins. - When using the iron, please be careful of fire and ignition. ・There is a risk of fire when ironing, so parents should always be present when ironing. *This product is for personal enjoyment only. Commercial use is prohibited.