Good luck with your favorite purchases
Specification:
Specifications: 463B (CH9102X), 463C (CP2102 TYPE-C) (optional)
SPIFlash: default 32Mbit
Bluetooth-compatible: Bluetooth-compatible 4.2 BR/EDR and BLE standards
WiFi: 802.11 b/g/n/
Supported interfaces: UART, SPI, SDIO, I2C, PWM, I2S, IR, ADC, DAC
On chip sensors: Hall sensors, temperature sensors, capacitive touch sensors
Serial port speed: default 115200 bps
Spectrum range: 2412~2484MHz
Antenna form: onboard PCB antenna with a gain of 2dBi
Transmission power:
802.11b:17±2dBm(@11Mbps)
802.11g: 14+2dBm(@54Mbps)
802.11n:13±2dBm(@MCS7)
Receiving sensitivity:
CCK, 1Mbps:-90dBm
CCK, 11Mbps: -85dBm 6Mbps(1/2BPSK): -88dBm 54Mbps(3/464-QAM):-70dBm
MCS7(65Mbps, 72.2Mbps):-67dBm
power waste: 300mA@3.3V
Security: WPA/WPA2/WPA2 Enterprise/WPS
Power supply range: USB power supply: 5V Vin pin power supply: 5.0V~12V
Working temperature: -20~85 ℃
Storage environment: -40~90,<90% RH
Product size: about 52 * 29 * 15mm/2.04 * 1.14 * 0.59inch
1. 802.11b/g/g WiFi+BT module;
2. Low power dual core 32-bit CPU, which can be used as an application processor;
3. The main frequency can reach up to 240MHz, and the computing power can reach up to 600DMIPS;
4. Built in 520 KB SRAM;
5. Support interfaces such as UART/SPI/I2C/PWM/DAC/ADC;
6. Support openOCD debugging interface;
7. Supports multiple sleep modes, with a current of 6.5uA during deep sleep;
8. Embedded Lwip and FreeRTOS;
9. Support STA/AP/STA+AP mode;
10. Support Smart Config/Airkiss one click network distribution;
11. Universal AT command, easy to use;
12. Support local serial port upgrade and remote upgrade (FOTA).
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 x ESP32 Development Board
Zwrot w przypadku braku dostawy
